Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Reverse light feed for reversing sensors
        
(Message started by: cossieguy on Sep 14^th, 2006, 3:50pm)

Title: Reverse light feed for reversing sensors
Post by cossieguy on Sep 14^th, 2006, 3:50pm

How do i tap into the reverse light power to fit my reversing sensors? "Scotchlock" the way forward? or is there another way? ???

Title: Re: Reverse light feed for reversing sensors
Post by Simmo on Sep 14^th, 2006, 4:15pm

You can of course use scotchlock connectors but the advice here has allways been to solder for a better connection.

Title: Re: Reverse light feed for reversing sensors
Post by TiberiuS on Sep 14^th, 2006, 6:23pm

DON'T use scotchlocks, they are the cause of endless problems ;)

Strip about 10mm insulation from the wire with a scalpel, wrap your bared feed wire around, solder and wrap it in insulating or self amalgamating tape ;)

Regards, Bruce.