Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> vacuum pipes
        
(Message started by: xr4s_r_ace on Dec 12^th, 2006, 12:39am)

Title: vacuum pipes
Post by xr4s_r_ace on Dec 12^th, 2006, 12:39am

need a bit of help to identify a couple of things on the fine engine that is a 24v cos. on the right hand side of the intake manifold is a push in black plastic pipe, am i right in thinking it goes to a tee piece on the pipe to the brake servo. secondly, the small black plastic pipe from the egr, does that go to the rubber pipe to the solenoid valve on the inner wing. cheers. ps, does anyone with a scorpio cos live in hull? ???

Title: Re: vacuum pipes
Post by Snoopy on Dec 12^th, 2006, 7:34am

Does this post help here VACUM PIPES (http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Advice;action=display;num=1162150299) ?????