Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> estate rear bumber
        
(Message started by: ricky on May 8^th, 2007, 6:31pm)

Title: estate rear bumber
Post by ricky on May 8^th, 2007, 6:31pm

hi anybody know how to remove an estate rear bumber thanks

Title: Re: estate rear bumber
Post by scorpio_man on May 8^th, 2007, 9:13pm

hi there

http://www.fordscorpio.co.uk/exttrimmanl.htm

no screws at the top edge, iirc.

hth

Title: Re: estate rear bumber
Post by Dave2302 on May 9^th, 2007, 10:24am

Hi,

4 x M8 bolts underneath rear, go through chassis rails into bumper brackets, these can have either 13mm socket heads, or in some cases torx type heads. Then there is two twist and release bayonet type fixings up behind the wheel arches, which you can just about get your hand up to turn them approx half turn anti clockwise.

Regards Dave