Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Fitting 2.0 inlet manifold to a 2.3?
        
(Message started by: a11mcr on Jan 6^th, 2008, 6:10pm)

Title: Fitting 2.0 inlet manifold to a 2.3?
Post by a11mcr on Jan 6^th, 2008, 6:10pm

Fitting 2.0 inlet manifold to a 2.3? :-/
hi all and happy new year ::) ::)
is this an easy job to do or what? i am very good at mechanics so not a problem
Thanks
mark

Title: Re: Fitting 2.0 inlet manifold to a 2.3?
Post by Tons_of_fun on Jan 6^th, 2008, 6:51pm

Hi mark.The guy you need to speak to is Matt,as he has already done this to his 2.3 estate.From what i understand it,s not too difficult.Just need to be a bit creative with some of the pipe work.Good luck

Title: Re: Fitting 2.0 inlet manifold to a 2.3?
Post by a11mcr on Jan 7^th, 2008, 5:05pm

Hi it seems the 2.0L has two inlet pipes but my 2.3L only has one? will i have to fitthetwo pipes?.
Does anyone know how i can contact Matt?
Cheers
mark

Title: Re: Fitting 2.0 inlet manifold to a 2.3?
Post by Matt on Jan 7^th, 2008, 6:23pm

hiya,

yes you will also need the 2.0l air intake box, again this will just swap straight over, the 2.0l inlet doesn't have enough connections for all the 2.3's vacuume pipes so you will need to tee a few pipes, there are 2 connections on the underside of the intake, i advise you pipe this up before you fit the manifold, there a b****r to get to afterwards