Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Question on an autobox 2.3 
        
(Message started by: tve on Nov 22^nd, 2008, 5:24am)

Title: Question on an autobox 2.3
Post by tve on Nov 22^nd, 2008, 5:24am

Congratulations to All. How independently to execute the box test. Impression in an incomplete transmission of energy from the engine on the wheels, all transfers are well switched. Thanks.

Title: Re: Question on an autobox 2.3
Post by Highlander on Nov 22^nd, 2008, 9:41am

Sounds like the torque convertor.
is the autobox oil level ok?

Have you used a language translation program?

Title: Re: Question on an autobox 2.3
Post by tve on Nov 22^nd, 2008, 3:23pm

Yes I use the translator. If correctly has understood - the hydrotransformer it is faulty. And how to carry out the test.

Title: Re: Question on an autobox 2.3
Post by Highlander on Nov 22^nd, 2008, 5:39pm

I think you need to have an OBD scan done to be sure.

Have you cleaned the MAF?

are the VSS and Speedo working ok?

Title: Re: Question on an autobox 2.3
Post by tve on Nov 23^rd, 2008, 9:38am

OBD without errors, MAF pure, the speedometer works well.

Title: Re: Question on an autobox 2.3
Post by Highlander on Nov 23^rd, 2008, 11:39am

Have you had it OBD checked by Ford or an autobox specialist?

Title: Re: Question on an autobox 2.3
Post by tve on Nov 23^rd, 2008, 11:43am

Checked at the dealer and (Alex).

Title: Re: Question on an autobox 2.3
Post by Highlander on Nov 23^rd, 2008, 11:56am

Sounds like its time to start swapping parts , try the torque convertor first then the gearbox

Title: Re: Question on an autobox 2.3
Post by tve on Nov 23^rd, 2008, 12:00pm

There is a test: to press a brake, a gas pedal in a floor and to look engine turns at (D). But what turns normal?

Title: Re: Question on an autobox 2.3
Post by Highlander on Nov 23^rd, 2008, 12:03pm

Not understanding, are you looking for the engine rpm at a certain speed/gear.

Is the gearbox slipping or does it not go into top gear?

Title: Re: Question on an autobox 2.3
Post by tve on Nov 23^rd, 2008, 12:26pm

No. The car on a brake. It is the test test of the hydrotransformer.

Title: Re: Question on an autobox 2.3
Post by scorpio_man on Nov 23^rd, 2008, 1:00pm

hi there

i think you're talking about a 'stall test'.

not sure how to do it, though. i have heard it can take a fair bit out of your gearbox doing it. :-/

found this on google... http://www.autoshop101.com/forms/AT02.pdf

stall test is at the bottom of the page.

hth

Title: Re: Question on an autobox 2.3
Post by tve on Nov 23^rd, 2008, 1:17pm

Thanks.

Title: Re: Question on an autobox 2.3
Post by Dave2302 on Nov 23^rd, 2008, 2:22pm

Hi,
If Reverse is OK but problem is with forward gears only then Torqued converter will be okay, but if problem is with forward and reverse then could well be T/C.
If no driv in any gears at all could be the splines stripped in T/C a common problem. HTH Dave