Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 2,3 inlet manifold 
        
(Message started by: david49uk on Feb 19^th, 2010, 11:36pm)

Title: 2,3 inlet manifold
Post by david49uk on Feb 19^th, 2010, 11:36pm

on be half of my mate can any body tell me if there is more than one type of inlet manifold for the 2.3 also which metal inlet manifold fits the 2.3 and what mod does it need .dave

Title: Re: 2,3 inlet manifold
Post by Jonnycab on Feb 20^th, 2010, 3:21am

There is only one type of inlet manifold for the 2.3 & that is the plastic one that eventually starts leaking water ;)

The 2.0 16V manifold is metal & will fit the 2.3, but a couple of vacuum pipes have to be modified to fit & the throttle & air trunking from the 2.0 will have to used

There was a post recently about this :)

Title: Re: 2,3 inlet manifold
Post by Simmo on Feb 20^th, 2010, 8:02am

Was it This (http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Problems;action=display;num=1264963302;start=0#0) ?.