Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Heated seat wiring
        
(Message started by: lleewar on Nov 16^th, 2010, 4:47pm)

Title: Heated seat wiring
Post by lleewar on Nov 16^th, 2010, 4:47pm

Hi Guys, Now that I,ve put in my leather interior(it came from a 24V) I have a centre console that has the traction control switch, which I obviously cannot use, but the heated seat switches as well which I would like to utilise. Is it just a case of connecting the switches to the underside of the seat? Thanks Lee

Title: Re: Heated seat wiring
Post by Daven aka Cheekyboy3 on Nov 17^th, 2010, 7:36pm

Pretty much - if you have the loom and the relay (which is in the console) you should be ok. I made up a loom on the last Scorpio I had and don't remember anything too complex. If I remember correctly the relay picks up a 5amp supply from the radio circuit and the 20amp(check this) from the cigar lighter!

Dave

Edit - diagram here http://www.fordscorpio95plus.co.uk/schem/14.pdf 3rd page ;)

Title: Re: Heated seat wiring
Post by lleewar on Nov 17^th, 2010, 9:25pm

Dave, Thanks for the info. Will investigate but I think the wiring was cut when the seats were removed from the doner car rather than unplugged. Not good at electrics so will probably have to ask for the wiring on here. Lee