Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> bob parts to boa engine
        
(Message started by: solarpanel on Apr 30^th, 2012, 7:19pm)

Title: bob parts to boa engine
Post by solarpanel on Apr 30^th, 2012, 7:19pm

hi anyone know if bob heads will fit boa block and would piston swap over?

Title: Re: bob parts to boa engine
Post by Matt on Apr 30^th, 2012, 7:47pm

Heads are smaller on a bob as it runs a simplex chain instead of the boa duplex

pistons might swap but you would have to check the rods

Title: Re: bob parts to boa engine
Post by amigafan2003 on May 1^st, 2012, 1:31pm

on 04/30/12 at 19:47:36, Matt wrote:

Heads are smaller on a bob as it runs a simplex chain instead of the boa duplex

pistons might swap but you would have to check the rods

Heads are shorter from the back as well to clear the Scorps bulkhead.