Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> Auto levelling headlights
(Message started by: DJWerkz on Jul 9th, 2005, 11:11pm)

Title: Auto levelling headlights
Post by DJWerkz on Jul 9th, 2005, 11:11pm
While putting my interior back together after replacing the heater matrix I noticed a spare blue block connector exiting the same location as the connector for the headlight rotary switch.
On further investigation I find that this second connector is for the option of auto levelling headlights.
On my car I only have the main rotary switch for the headlight function but in the manual there is a picture of a fascia with both the headlight rotary switch and a second rotary switch for adjusting the level of the headlights.
If I wanted to change my car so I have this function do I only need the correct fascia section with second rotary switch or will I need to check into headlight moutings as well?  If I have the cabling at the dash section is it reasonable to assume that I have all the necessary cabling to the headlights?
Any help appreciated ;)

Title: Re: Auto levelling headlights
Post by Paul B on Jul 10th, 2005, 7:59am
The cabling may well be there, but the headlamps are different. So you might have to buy the more expensive headlamp units, and they are dear too!  :o

Will try to find pictures of the different lights for you.

Title: Re: Auto levelling headlights
Post by scorpio_man on Jul 10th, 2005, 8:27am
hi there

the headlights come with a motor built in to them. cost about £150+VAT each!

is your car not an estate? i've got them on my estate, but because of the self leveling suspension, they are absolutely useless!


hth



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.