|
||
|
Title: Speedo problem Post by kalvin_uk on Aug 1st, 2005, 1:13pm Hi, As you might all be able to tell I'm new owner and have a few niggling problems. My Speedo needle seems to have got stuck against the bottom of the guage pod. If I take the pod out and re-set the needle is this likely to happen again. anything I can do to prevent this? I also need to drain and re-fill the cooling system due to a split in the radiator - post in parts request currently. Does the system needed to be drained of air whilst refilling ? If so where are the bleed valves ? Thanks, Kalv. |
||
|
Title: Re: Speedo problem Post by scorpio_man on Aug 1st, 2005, 1:24pm hi there and welcome re speedo, try a reset first.... http://www.fordscorpio.co.uk/instreset.htm when refilling the system, have it facing up a hill. let it heat up with the cap off. then give it a small run and top up if needed. hth |
||
|
Title: Re: Speedo problem Post by kalvin_uk on Aug 1st, 2005, 3:19pm on 08/01/05 at 13:24:50, scorpio_man wrote:
Thanks! will jacking the front up do if I can't find a suitable slope ? |
||
|
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |