Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Changing Lambda Sensor 24v
        
(Message started by: RebGershon on Aug 11^th, 2005, 9:05pm)

Title: Changing Lambda Sensor 24v
Post by RebGershon on Aug 11^th, 2005, 9:05pm

Has anyone changed the drivers side precat sensor themselves on a Cosworth and if they were successful could they please enlighten me as to how to get at it in the first place?

TIA

Geoff. ???

Title: Re: Changing Lambda Sensor 24v
Post by Thunderchild on Aug 12^th, 2005, 11:07am

Hi mate,

I've done this but it's an absolute dog of a job!! I finally had to take off the manifold to get the sensor out. Maybe others have had better success. Had to get a welding torch onto the nuts at the manifold to cat connection in order to get them off. All in all about 4 hours work and a new set of gaskets for the manifold.

HTH

Thunderchild