Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> sender units
        
(Message started by: ferretmobile on Oct 25^th, 2006, 3:24pm)

Title: sender units
Post by ferretmobile on Oct 25^th, 2006, 3:24pm

Can anyone direct me to the instructions on how to remove and replace the water temp sender units, finnis no etc. I also believe that some form of loctite is used in this process. If you fine peeps have had experience of this wee job any advice would be handy.
ferret

Title: Re: sender units
Post by Simmo on Oct 25^th, 2006, 5:07pm

This should help.http://www.fordscorpio.co.uk/manual/engineman/dohc16v/16vECT.pdf. They are side by side.

Title: Re: sender units
Post by ferretmobile on Oct 26^th, 2006, 9:02am

Cheers Simmo :)