Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> electric mirrors memory
        
(Message started by: standarren on Feb 3^rd, 2007, 6:47pm)

Title: electric mirrors memory
Post by standarren on Feb 3^rd, 2007, 6:47pm

hi guys when i set my mirrors they stay in the right place until i put it in to reverse they never go back to right place when i put it in drive so i have to move them again any ideas daz

Title: Re: electric mirrors memory
Post by cossieguy on Feb 3^rd, 2007, 7:12pm

Daz, I had exactly the same problem. I tried changing loads of things including:
1, Passenger mirror.
2, Door control module.
3, Drivers door module.
4, Memory switch(Drivers door).

In the end I just disconnected the memory switch to passenger mirror so it didn't dip in reverse(Still Had heated mirror and electric movement). I believe that my fault lied in the wiring loom inside bulkhead as everything to do with doors/mirrors etc was ok.
Hope this helps,
Guy.

Title: Re: electric mirrors memory
Post by standarren on Feb 3^rd, 2007, 7:43pm

cheers for that mate at least i no theres no fix

Title: Re: electric mirrors memory
Post by v4-max on Feb 4^th, 2007, 11:44am

i have the same problem, its driving me nuts. can you tell me which switch you disconnected? ta john

Title: Re: electric mirrors memory
Post by cossieguy on Feb 4^th, 2007, 1:10pm

Inside the door frame there are 2 plugs from the mirror (One black,one white) Disconnect the black one and it diasbles the memory function for that mirror but keeps the heating/electric functions. Hope this helps.
Guy.

Title: Re: electric mirrors memory
Post by v4-max on Feb 4^th, 2007, 1:49pm

thanks for that sanity has now returned