Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> One touch front window reset
(Message started by: Neil W on May 26th, 2007, 8:51pm)

Title: One touch front window reset
Post by Neil W on May 26th, 2007, 8:51pm
I have just completed some work on the car, which required the battery to be disconnected, and I have now lost my drivers door window one touch open and close facility. I have also lost the double flash of indicators to signify dead-locking (which is known as the Swiss version, I believe).

The method for re-coding these doesn't seem to be in the technical section. Can anyone advise how to do these please?

Thanks,

Neil W.

Title: Re: One touch front window reset
Post by scorpio_man on May 26th, 2007, 9:14pm
hi there

the window reset is easy. just hold the down button for a further 3 secs after the window hits the bottom. then do the same for up.

re the double locking. is the car still double locking? have you checked with a window open, then tried the interior lock? the command is entered by fsd2000/wds and shouldn't be lost, even with the battery disconnected for some time.

you could try the ccm dianostics by switching on the ignition and holding in the REAR heated window button for 15secs, then starting the engine. open the doors one at a time and see if you get a conformation beep.

hth

for reference, this info is in the fault finder section on the main site.

Title: Re: One touch front window reset
Post by Neil W on May 26th, 2007, 11:29pm
Many thanks, I will try the reset in the morning. I can double lock the car with the key and get a double flash of the indicators, so perhaps when I recode the remote fob (using the ignition key sequences) the remote double locking will work!

Neil W.



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.