Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> vis not working
        
(Message started by: markmills2000uk on Jul 3rd, 2008, 7:52am)
Title: vis not working
Post by markmills2000uk on Jul 3rd, 2008, 7:52am
hi there i have a scorpio 24v bob na dmy vis doesnt seem to be working,when i rev the engine above 3200 it only flicks it for a second then goes back to where it was,anybody have any ideas

also i was going to fit single point lpg and was wondering what is the best size of mixer to fit,i noticed a bit on this site with instuctions but it doesnt say what size mixer he used,cheers
Title: Re: vis not working
Post by peteHull on Jul 5th, 2008, 11:35am
I wouldn't fit single point LPG, it can have adverese effects in the case of a misfire....

I have a Sequencial system fitted by Autogas and has never given a problem in 2 years now.... Carefull consideration is the requirement...

hth

Pete


Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.