Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts For Sale >> cossie saloon for spares
        
(Message started by: vaughant on Oct 16^th, 2006, 11:46pm)

Title: cossie saloon for spares
Post by vaughant on Oct 16^th, 2006, 11:46pm

Hi guy`s. Further to my engine problem post on the prob`s page, I can`t really see that i`m going to spend enough time and money on this instead of doing things elsewhere, so I have decided to offer it for spares/breaking. As I mentioned in the previous post the engine is smokey, could be fuel, could be wear, I think the former, but don`t really know, so that`s not really worth big bucks,but there are loads of good bit`s including:

- 36000 mile auto box, perfect working order ( car can be driven to confirm this)

- MINT biscuit leather interior

- good clocks showing 128k

- dipping mirror

- all electrics O.K

- 4/5 alloys with mint 16" tyres ( not teledial`s)

- good bootlid,headlights,ok doors etc.

-air con/abs all fine.

If I can get good offers on the above, then i`ll break it and someone can take it away with the engine for spares or if i can get my £250 back, I`ll sell it complete as is.

Reply to me on here or on 07999573474 or PM me for home phone number .

I`m in swansea by the way.

Title: Re: cossie saloon for spares
Post by mazzy_j on Oct 17^th, 2006, 7:25am

How much for the dippy mirror please plus postage to Surrey? Mines looking like its about to leak everywhere :-X

Cheers, Matt

Title: Re: cossie saloon for spares
Post by vaughant on Oct 17^th, 2006, 6:51pm

what`s the going rate on these? £30-40 I think. Not sure of postage,must find out for ya!!

Title: Re: cossie saloon for spares
Post by a900one on Oct 17^th, 2006, 8:36pm

I would be intrested in the wheels or poss the whole car if you are near Cornwall.

Title: Re: cossie saloon for spares
Post by vaughant on Oct 17^th, 2006, 10:10pm

Hi mate, i`m not really near Cornwall, i`m in Swansea South Wa;es, although I suppose it depends on what part your in, but i still think were talking 200 miles at least. I MAY, and I stress MAY be able to deliver it for petrol cost`s, I say may, as I have a towing dolly, but these are big beasts to tow and I`m not sure of kerbweights etc. If your only after the wheels we could meet at the bridge for fuel money?

Title: Re: cossie saloon for spares
Post by Highlander on Oct 19^th, 2006, 11:34am

PM sent

Title: Re: cossie saloon for spares
Post by a900one on Oct 19^th, 2006, 8:23pm

It would be over 400 miles round trip, as I only need one it would workout cheaper to buy a new one but thanks for the offer.

Title: Re: cossie saloon for spares
Post by vaughant on Oct 20^th, 2006, 11:12pm

on 10/19/06 at 11:34:03, Highlander wrote:

PM sent

Reply sent, let me know what you think!!

Title: Re: cossie saloon for spares
Post by vaughant on Oct 20^th, 2006, 11:14pm

on 10/19/06 at 20:23:16, a900one wrote:

It would be over 400 miles round trip, as I only need one it would workout cheaper to buy a new one but thanks for the offer.

Point taken sir,although I could meet you at the Severn Bridge for £80 quid all in, even with petrol that`s not too bad for 4wheels with excellent tyres!!! Let me know what you think!!

Title: Re: cossie saloon for spares
Post by vaughant on Oct 20^th, 2006, 11:16pm

on 10/17/06 at 07:25:29, mazzy_j wrote:

How much for the dippy mirror please plus postage to Surrey? Mines looking like its about to leak everywhere :-X

Cheers, Matt

I`ll double check postage and condition Matt, but I think I can get it to you for £40 all in? Let me know mate.

Title: Re: cossie saloon for spares
Post by vaughant on Oct 23^rd, 2006, 5:13pm

Guy`s this car is definitley being broken now due to too many people promising to come and look at the engine problem,not turning up and then offering to "take the car off my hands ".

ALL PRICES CHEAP, MAKE ME AN OFFER,EVERYTHING WORKS PERFECTLEY ASIDE FROM THE SMOKY MOTOR( WHICH STILL RUNS WELL!!!!!).

Title: Re: cossie saloon for spares
Post by esex_tony on Oct 23^rd, 2006, 6:03pm

have you got the front bumper what colour is it and price for postage to essex thanks

Title: Re: cossie saloon for spares
Post by vaughant on Oct 23^rd, 2006, 11:53pm

-yes
-black
-it`s got a crack in it
-£20,i`ll chuck in all the indicator`s/fog`s etc.
I`ll find out postage if you still want it,let me know on here,thanx, Vaughan.

Title: Re: cossie saloon for spares
Post by 24vgaz on Oct 25^th, 2006, 9:16am

Hi Bud
do you have the boot lid lock mech? Not the key part but the locking bit?

Cheers

Title: Re: cossie saloon for spares
Post by twinturbo on Oct 25^th, 2006, 10:19am

I need the EGR and EVAP control solenoids from the front drivers inner wing.

TT

Title: Re: cossie saloon for spares
Post by twinturbo on Oct 25^th, 2006, 12:39pm

Title: Re: cossie saloon for spares
Post by vaughant on Oct 25^th, 2006, 10:38pm

on 10/25/06 at 09:16:26, 24vgaz wrote:

Hi Bud
do you have the boot lid lock mech? Not the key part but the locking bit?

Cheers

Yeah, should do, car is complete, say a £10 plus postage?

Title: Re: cossie saloon for spares
Post by vaughant on Oct 25^th, 2006, 10:44pm

on 10/25/06 at 12:39:16, twinturbo wrote:

Also if your engine is kippered,

The cams with washers, Plenum, the engine control loom ( that goes to the injectors etc ) and goes to the TWO big square multi plugs on the inner wing... including the other half of the multi plugs and a few inches of cable on the car side..

Trip Computer Switch.

Not really sure how easy it is to get all these bits off and certainly don`t want to start stripping down the engine to get at cam`s etc. £150 will buy you everything under the bonnet,engine,rad,starter,alternator,loom and whatever else you want engine wise. I`m happy to throw in the red key with ecu as well.

TT

Title: Re: cossie saloon for spares
Post by vaughant on Oct 25^th, 2006, 10:45pm

Sorry twin turbo, the reply is included, but within the quote!!!!

Title: Re: cossie saloon for spares
Post by twinturbo on Oct 25^th, 2006, 10:58pm

If you cant strip the engine then how much for just the two solenoids then..??

TT

Title: Re: cossie saloon for spares
Post by Matt on Oct 26^th, 2006, 9:01pm

is it an ultima?

and what wireing have you got? i might be intresting in all of it :o :o ;D

Title: Re: cossie saloon for spares
Post by vaughant on Oct 26^th, 2006, 11:53pm

on 10/26/06 at 21:01:21, Matt wrote:

is it an ultima?

and what wireing have you got? i might be intresting in all of it :o :o ;D

Hi matt,yeah, it`s an ultima,95 model,24v cosworth ( of course!!). Met black with full biscuit leather. I`m looking to get my £250 back if possible. There does seem to be some interest in breaking, but only bits and bobs at the moment,i won`t and haven`t touched anything on it yet. Let me know what you think, i`ll be in work the next four day`s, but i`ll keep an eye on the computer.

Title: Re: cossie saloon for spares
Post by Matt on Oct 27^th, 2006, 5:40pm

£250! that all :o

when i said id be intrested in all of it i ment the wireing, but for that money i'd have the car off you, where abouts are you located??

Title: Re: cossie saloon for spares
Post by Matt on Oct 27^th, 2006, 5:42pm

ah just read the your first post, you in swansea, do you think it could be driven to birmingham? or is the engine to far gone?

Title: Re: cossie saloon for spares
Post by Highlander on Oct 27^th, 2006, 5:58pm

Are you in the AA? ;)

Title: Re: cossie saloon for spares
Post by Matt on Oct 27^th, 2006, 7:40pm

no but know a bloke with a flat bed lol

matt ;D

Title: Re: cossie saloon for spares
Post by Matt on Oct 27^th, 2006, 9:43pm

hi vaughant,

ive just been reading your other topic on the problems section, sounds silly but have you tried giving the car a good run?

also whip off the breather pipe, when i bought my cossie it was all bunged up and could hardly breath. i would suggest whipping off the rocker covers and check for gunge/oil sludge, but it's a lot of work if your not going to keep the car

Title: Re: cossie saloon for spares
Post by vaughant on Oct 28^th, 2006, 11:05pm

on 10/27/06 at 21:43:49, Matt wrote:

Hi matt, thanks for the tip, i could have a quick look i suppose, it wouldn`t do any harm!! I drove the car back about 5 miles when i first got it, car drove superbly, but smoke did not improve at all, and still appeared under hard acceleration, although not noticably worse. Regarding your question, i don`t think it would be a very good idea to drive it that far, no tax or mot& the smoke and excessive fuel consumption, your mate with a low loader seems a very good idea, if your west mids your approx 2hr`s from me, i MAY be able to deliver it some of the way at east as I have a towing dolly, albeit with rather weak ramps! As i said, i`m not looking to make a profit on this car, just get my £250 back, which means a good bargain for you!!If your genuinley interested, which you seem to be, get back to me on here or PM me your number and i`ll phone you for a chat. Kind regards, Vaughan.

Title: Re: cossie saloon for spares
Post by twinturbo on Oct 29^th, 2006, 6:51am

Still after the EGR & CANP solenoids......

Title: Re: cossie saloon for spares
Post by Matt on Oct 29^th, 2006, 10:30am

cosworth - excessive fule consumption, sounds about right lol

i wouldnt take it down the motorway, to many things to catch you out on them.

i have a cossie myself and was thinking of joining the AA or RAC anyway, maybe i can get them to pick it up??

do you have any pics of the car??

TT

what car do you have? i have a 2.3 egr you can have for free, as it's stuck to the exhaust manifold (it would come off it you could get it in a vice)??

either collect or pay postage i can cut the manifold down to lighten it up a bit

Title: Re: cossie saloon for spares
Post by vaughant on Nov 3^rd, 2006, 9:43pm

Hey matt, you still interested in this?

Title: Re: cossie saloon for spares
Post by Matt on Nov 4^th, 2006, 9:13am

pm sent

Title: Re: cossie saloon for spares
Post by vaughant on Nov 7^th, 2006, 1:23pm

and replied!!

Title: Re: cossie saloon for spares
Post by kimi on Nov 21^st, 2006, 2:09am

Hello, Have you still got the engine loom, if you have I would like to buy it please , It does not matter if it has begun to break up as I want to remake one for my 24v but need to keep mine on the road while I do.... thankyou ....Kimi....