Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >>  24v Cossie Timing Tensioner Bits
        
(Message started by: Dave2302 on Mar 22^nd, 2009, 5:10pm)

Title: 24v Cossie Timing Tensioner Bits
Post by Dave2302 on Mar 22^nd, 2009, 5:10pm

Need Tensioner, Blade and gasket for N/S cylinder bank. :'(
Has anyone got good used or new bits they can sell me ??
Cheers Dave

Title: Re: 24v Cossie Timing Tensioner Bits
Post by pinto on Mar 22^nd, 2009, 8:09pm

BOA bits are rarer than rocking horse..... so im guessing the BOB bits are too by now.

Tried your local ford dealer ?

Title: Re: 24v Cossie Timing Tensioner Bits
Post by Dave2302 on Mar 22^nd, 2009, 8:57pm

Hi,

Local Ford Dealer who knows what a 24v BOB is up here where I live }{ }{ }{

PMSL }{ }{ }{

Seriously tho, thanks for reply but to get it back together this century I'd rather source good used bits as most of the bits are fine (mine's a genuine low mileage one owner yatta yatta ;D )

I know the n/s tensioners and tensioner blades are on back order / NLA ;)

Regards Dave

Title: Re: 24v Cossie Timing Tensioner Bits
Post by Dave2302 on Mar 27^th, 2009, 12:39pm

Parts sourced, many thanks Rob. :)

Thanks to all who looked

Cheers Dave

Title: Re: 24v Cossie Timing Tensioner Bits
Post by amigafan2003 on Mar 31^st, 2009, 9:43pm

Darn - too late.

I have all the bits needed to do this:-

Plug Oil Drain 1663906 1
Gasket - Oil Drain Plug 1454118 1
Gasket Chain Tensioner RHS 7334674 1
Gasket Sump 6643926 1
Oil Seal Crank Front 7334625 1
Guide Cam Chain 1008459 2
Guide Cam Chain 7334661 1
Guide Cam Chain 1008399 1
Guide Cam Chain 7334660 1
Tensioner Blade - Cam Chain 1008390 1
Gasket Tensioner 7334674 1
Gasket Water Pump 1644432 1 4
Tensioner Blade - Cam Chain 1008387 1
Gasket Timing Cover 7334600 1
Gasket Inlet Plenum Chamber 1006844 2
Cam Chain Guide 1008390 1

I think those were the parts I ordered (I need to check in the garage for the recpt) but I know they all cost me a pretty peny - neary £300 I think. They'll all be going on ebay at the weekend.

Title: Re: 24v Cossie Timing Tensioner Bits
Post by gozz on Mar 31^st, 2009, 10:41pm

Dave.
I ordered an offside chain tensioner last summer ! I call in regularly for other parts,every time they tell me it's on back order ???
GOZZ.

Title: Re: 24v Cossie Timing Tensioner Bits
Post by amigafan2003 on Apr 1^st, 2009, 5:21pm

FPUK told me they aren't available anymore :-(

I do however have two off a 60k mile engine that look good.

Title: Re: 24v Cossie Timing Tensioner Bits
Post by v64x4mini on Apr 1^st, 2009, 9:04pm

I am looking for a set of bitd too if anyone knows where I can get a set....

Title: Re: 24v Cossie Timing Tensioner Bits
Post by Dave2302 on Apr 2^nd, 2009, 12:04am

V6 4x4 pm amigafan, he has all brand new bits ;)