Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Selector arm clip
        
(Message started by: Chieftain on Nov 9^th, 2009, 10:38am)

Title: Selector arm clip
Post by Chieftain on Nov 9^th, 2009, 10:38am

Looking for the retaining clip for the selector arm, this is a large spring clip, and not the small one as shown in pic 26 on g/box assy/removal

Title: Re: Selector arm clip
Post by Scorpio_Mike on Nov 10^th, 2009, 3:09pm

Have you tried a Ford main dealer to see if the part is still available ?

What pic are you looking at ?

Title: Re: Selector arm clip
Post by Chieftain on Nov 10^th, 2009, 4:15pm

In the repair section on g/box.

tried expaining it over the phone to dealer but without actually being there to point it out on fiche, is very hard. Vist a dealer is a long trip so has to tie in with other bits as well.

Title: Re: Selector arm clip
Post by Simmo on Nov 10^th, 2009, 4:48pm

Bob. Is it the one shown in 11 and 12 HERE (http://www.fordscorpio.co.uk/manual/autotrans/GearSelector.pdf).

Title: Re: Selector arm clip
Post by tlundkvi on Nov 10^th, 2009, 6:04pm

Number 18 in THIS (http://www.elcats.ru/ford/Parts.aspx?Model=84&Group=0000000C&AtId=26427)?

Title: Re: Selector arm clip
Post by Scorpio_Mike on Nov 10^th, 2009, 6:37pm

From Simmo & tlundki posts the part number should be 6177341
I think jonnycab had to get one of these quite recently.

Title: Re: Selector arm clip
Post by Chieftain on Nov 10^th, 2009, 7:15pm

It is a large clip not unlike those that hold a door lock in place in principle. It holds the control armo not its shaft on the g/box wish I could explain it better.

Title: Re: Selector arm clip
Post by Chieftain on Nov 10^th, 2009, 7:18pm

on 11/10/09 at 18:37:07, Scorpio_Mike wrote:

From Simmo & tlundki posts the part number should be 6177341
I think jonnycab had to get one of these quite recently.

Think that might be it item 25 not illustrated (that I can see)

Title: Re: Selector arm clip
Post by Scorpio_Mike on Nov 10^th, 2009, 9:08pm

18 & 25 have the same part number ;)

Title: Re: Selector arm clip
Post by tlundkvi on Nov 10^th, 2009, 9:18pm

Now let's hope it's available. Seems to be one of those really cheap items. Anyway, although in Russian this elcats.ru site is the best catalogue site since ford-xpert.com went offline. Shame though technical numbers aren't listed.

Title: Re: Selector arm clip
Post by Scorpio_Mike on Nov 10^th, 2009, 9:26pm

on 11/10/09 at 21:18:32, tlundkvi wrote:

If you download Google toolbar you can set it to automatically translate the page into English or other languages should you feel the need to ;D

Title: Re: Selector arm clip
Post by Chieftain on Nov 11^th, 2009, 7:32am

on 11/10/09 at 21:08:59, Scorpio_Mike wrote:

18 & 25 have the same part number ;)

Ah that makes it seemples then ;D

Title: Re: Selector arm clip
Post by Chieftain on Nov 13^th, 2009, 8:05pm

Contacted my usual Ford dealer for this clip and the small plastic cover for the retaining screw that holds the trim covering access to the drivers mirror.

Both available BUT only in the following quantities clip = 25 and cap 15. He tried another source and could get them but then found out the call had been routed to another branch miles away.

Never thought it would be so hard, trying another dealer monday.

Title: Re: Selector arm clip
Post by gozz on Nov 13^th, 2009, 8:49pm

Bob.
They may have to buy 25,but you can buy them singly.I bought four earlier this year, (selector rod clips),the number was indeed 6177341.
GOZZ.