Author |
Topic: Exhaust manifold (Read 343 times) |
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
 |
Exhaust manifold
« on: Jul 25th, 2007, 4:59pm » |
 Quote  Modify
|
Does anyone know the torque (Nm) settings for the exhaust manifold to cylinder head ?
Can't seem to find it anywhere 
|
|
 IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Exhaust manifold
« Reply #1 on: Jul 25th, 2007, 8:44pm » |
Quote Modify
|
JC, Go to THIS page and select the relevant engine ....2.3? and scroll through the PDF pages which have all the detail you need I think. HTH. Mike. 
|
|
IP Logged |
Now I'm an OAP
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: Exhaust manifold
« Reply #3 on: Jul 25th, 2007, 11:45pm » |
Quote Modify
|
Cheers guys...I was looking on the right page before, just must have missed it.
14Nm...for the manifold studs ?....that doesn't seem very tight....can anyone confirm that this correct ?
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: Exhaust manifold
« Reply #4 on: Jul 27th, 2007, 12:29am » |
Quote Modify
|
Bought a new exhaust manifold gasket from FMD today & asked them to check the torque for the manifold to head.
It's 23 Nm & not 14 Nm. I think that the studs into the head may be 14 Nm but the nuts holding the manifold on are 23 Nm
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
