Author |
Topic: where is....................... (Read 447 times) |
|
bizzay1
Full Member
  

1997 Cosworth Saloon
Posts: 481
|
 |
where is.......................
« on: Dec 12th, 2008, 5:19pm » |
Quote Modify
|
the oil pressure switch ?? I have changed my waterpump (thanks Baz) but when I start it the oil light does not go out, I presume I have knocked the wire off, but I can't for the life of me find the oil pressure switch, and I can't make out where it is from the manual - someone tell me please !!
|
|
IP Logged |
|
|
|
lube-o-rific
Full Member
  

1995 2.9 12v Ultima Saloon


Posts: 104
|
 |
Re: where is.......................
« Reply #1 on: Dec 12th, 2008, 5:48pm » |
Quote Modify
|
Don't know where it is on the 24v engine... On the 12v engine, its on the sump, underneath the A/C pump. It's a place to start?
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
    

Ford Kuga awd

Posts: 5654
|
 |
Re: where is.......................
« Reply #2 on: Dec 12th, 2008, 5:57pm » |
Quote Modify
|
hi there by the look of it, i'd say it was n/s under the air box area. hth
|
|
IP Logged |
|
|
|
Highlander
Moderator Expert
    

13 Scorpios, XR4x4, Suzuki SJ413 for off road :)

Posts: 8244
|
 |
Re: where is.......................
« Reply #3 on: Dec 12th, 2008, 7:31pm » |
Quote Modify
|
Baz did the same when changing his stat "Now at this point, I noticed a wire dangling and as I hadn’t unplugged any down there, panic set in. It turned out to be the cable to the oil pressure switch which is also in a masterly location: behind the thermostat!! And when I had been removing the stat, I had broken the top off! Now it was 5:25 in the afternoon, but my mate who owns the garage, got on to his local supplier and within half an hour, I had a new oil pressure switch, new belt and a new water temp sender as well (because we weren’t quite sure what had actually broken!) " http://www.fordscorpio.co.uk/replacestat.htm
|
|
IP Logged |

on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
|