Author |
Topic: Fuel shut off Loom (Read 815 times) |
|
dxt
Junior Member
I'm an oldie.
Posts: 66
|
 |
Fuel shut off Loom
« on: Nov 16th, 2009, 10:37am » |
 Quote  Modify
|
Without me taking the whole thing off can anyone tell me where the part number is located on the loom. I am having idle problems and stalling etc and have decided to replace the loom. I have replaced just about everything else (idle control valve, MAF etc) but still having problems. The connector onto the control valve is already wrapped in insulating tape and what cables I can see elsewhere are flaking away badly in parts. If anyone has the correct way to remove and replace I would also be most grateful.
Cheers
David
|
|
 IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Fuel shut off Loom
« Reply #1 on: Nov 16th, 2009, 10:48am » |
Quote Modify
|
Which engine is it?
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
dxt
Junior Member
I'm an oldie.
Posts: 66
|
|
Re: Fuel shut off Loom
« Reply #2 on: Nov 16th, 2009, 3:09pm » |
Quote Modify
|
Sorry ..... its a 2ltr 1996 saloon.
Cheers
|
|
IP Logged |
|
|
|
dxt
Junior Member
I'm an oldie.
Posts: 66
|
|
Re: Fuel shut off Loom
« Reply #3 on: Nov 16th, 2009, 3:24pm » |
Quote Modify
|
16v
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: Fuel shut off Loom
« Reply #4 on: Nov 16th, 2009, 4:15pm » |
Quote Modify
|
The part number should be on a bit of paper wrapped around the cable shielding at the top part (coils) of the loom.......that's asumming the shielding hasn't all crumbled away 
|
|
IP Logged |
|
|
|
Technology2005
Full Member
Scorpio 2.0 Ultima x 2
Posts: 207
|
|
Re: Fuel shut off Loom
« Reply #5 on: Nov 16th, 2009, 8:36pm » |
Quote Modify
|
on Nov 16th, 2009, 10:37am, dxt wrote:Without me taking the whole thing off can anyone tell me where the part number is located on the loom. I am having idle problems and stalling etc and have decided to replace the loom. I have replaced just about everything else (idle control valve, MAF etc) but still having problems. The connector onto the control valve is already wrapped in insulating tape and what cables I can see elsewhere are flaking away badly in parts. If anyone has the correct way to remove and replace I would also be most grateful.
Cheers
David |
|
If you're planning on getting a brand new loom then I think all you will need is your 17 digit VIN and Registration number to get the loom from FMD.
If you plan to get secondhand disregard what I said and good luck in finding the part number.
David
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: Fuel shut off Loom
« Reply #6 on: Nov 17th, 2009, 1:01am » |
Quote Modify
|
You can get a new loom from FMD just by giving them your registration, so they can find the right part 
Be warned though...you won't much change out of £200
|
|
IP Logged |
|
|
|
Technology2005
Full Member
Scorpio 2.0 Ultima x 2
Posts: 207
|
|
Re: Fuel shut off Loom
« Reply #7 on: Nov 17th, 2009, 8:23am » |
Quote Modify
|
£155.51 on fleabay at the moment, so yes, a tad expensive
David
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print