Author |
Topic: Heated seat wiring (Read 668 times) |
|
leewar
Senior Member
I'm a YaBB newbie!
 
Posts: 1509
|
 |
Heated seat wiring
« on: Nov 16th, 2010, 4:47pm » |
 Quote  Modify
|
Hi Guys, Now that I,ve put in my leather interior(it came from a 24V) I have a centre console that has the traction control switch, which I obviously cannot use, but the heated seat switches as well which I would like to utilise. Is it just a case of connecting the switches to the underside of the seat? Thanks Lee
|
|
 IP Logged |
|
|
|
Daven
Senior Member
I'm a cheeky Boy! (Simmos fan club)
Posts: 1117
|
|
Re: Heated seat wiring
« Reply #1 on: Nov 17th, 2010, 7:36pm » |
Quote Modify
|
Pretty much - if you have the loom and the relay (which is in the console) you should be ok. I made up a loom on the last Scorpio I had and don't remember anything too complex. If I remember correctly the relay picks up a 5amp supply from the radio circuit and the 20amp(check this) from the cigar lighter!
Dave
Edit - diagram here http://www.fordscorpio95plus.co.uk/schem/14.pdf 3rd page 
|
|
IP Logged |
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1509
|
|
Re: Heated seat wiring
« Reply #2 on: Nov 17th, 2010, 9:25pm » |
Quote Modify
|
Dave, Thanks for the info. Will investigate but I think the wiring was cut when the seats were removed from the doner car rather than unplugged. Not good at electrics so will probably have to ask for the wiring on here. Lee
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print