Click to return to main site

Welcome, Guest. Please Login or Register.
Nov 22nd, 2026, 12:29pm


Balance: £36.25
Home Home Help Help Search Search Members Members Login Login
Ford Scorpio Forum« Any tryre experts? »
   Ford Scorpio Forum
   General
   Give/Need advice to/from others
(Moderators: Baz, scorpio_man, admin, Simmo, Highlander)
   Any tryre experts?
« No topic | Next topic »
Pages: 1  Reply Reply Send Topic Send Topic Print Print
   Author  Topic: Any tryre experts?  (Read 101 times)
DavidBE
Full Member
***



1998 Ghia X 2.9 24V Auto Estate

   
View Profile

Posts: 171
Any tryre experts?
« on: Oct 25th, 2026, 4:10pm »
Quote Quote Modify Modify

I need to get some new back tyres on my Ghia-X Cosworth Estate. Shouldn't be an issue, but ...
 
The handbook, all the references, have 225/50s listed for all the 16" alloys. And that's what was on this car when I got it in 2020 (and was on my previous 2.3 Ultima saloon). But, and I gather they were only fitted to facelift Ghia and Ghia-X Cosworths, as mine is, this car has the 32-spoke 'Classic' design alloys. Since getting my first Scorpio in 2007, I have collected virtually every external and internal book/booklet Ford produced about the Scorpio, from all the brochures, to the Technical Service Training Guides for their own technicians (that's different to the service manuals here - the Tehcnical Service Training manuals are just extensive, illustrated guides to the car and what's where and what's changed how from Granada MkIII, which to Ford and every other country in Europe was the Scorpio Mk I, ours being the Mk II), the massive folder with all the foldout electrical diagrams(and to think all the electrical diagrams for my first car fitted on one page in its Haynes manual!), and the Scorpio Accessories booklet. (As well as having their technical manual on pdf, as here, I've even got the Ford EDIS system that runs with the whole Scorpio section in it in an emulator on my laptop the same as in Ford dealerships as used by their technicains then.) The 32-spoke Classic alloys are not mentioned ANYWHERE. AT ALL.
 
Except ... the Ford Accessories catalogue for ALL their cars at that time, for one year only, does have them listed as an option for Scorpios - and some trim-and-engine combinations of Mondeo. This is the only official Ford mention of them anywhere (and here on the Alloys page) I can find. Nowhere to look up what tyre pressures etc. And here's the thing: every other Scorpio 16" alloy, it gives tyres as 205/55 or 225/50 (and the tyre pressures for a 24V with 225/50 are in the handbook). But for the 32-spoke Classic ONLY, in this Accesssoroes book - the ONLY place that mentions them at all - it gives 215/55s and not the 225/50s as with the other 16" alloys. And there's no line for those and what tyre pressures in the handbook or anywhere else.
 
So, the question. Do I stick with 225/50s as were on it when I got it and have been for the 6 years I've been driving it, as all references say the Cosworths take and for which there are recommeded tyre pressures? Or do I switch to 215/55s as that one Ford Accessories catalogue says those 32-spoke 'Classic' 16" alloys - otherwise not mentioned anywhere - are supposed to have, where there isn't even a tyre pressure figure given anywhere?
 
I do wonder if those final 7 months of facelift Ghia and Ghia-X Cosworth Scorpios came with some leaflet about those 32-spoke wheels as there is no info anywhere else about them; but I got all the rest of the documents that originally came with the car down to very minor obscure stuff, and there was nothing about those wheels.
 
Any opinions? I don't know enough about tyres to know how much or how significant the difference would be, running them on the 2015/55s as in the Accessory booklet's listing as opposed to the 225/50 that have been on it since beforee I got it, and as all the other (and common) Scorpio 16" alloys take. (I presume I'd need to change all 4 to 2015/55s if I did, but the front tyres treads are starting to get a bit low anyway.)
 
IP Logged
DavidBE
Full Member
***



1998 Ghia X 2.9 24V Auto Estate

   
View Profile

Posts: 171
Re: Any tryre experts?
« Reply #1 on: Oct 27th, 2026, 2:34pm »
Quote Quote Modify Modify

Never mind. After a consultation with the local tyre place, I've decided to stick with 225/50s, even though the 32-spoke Classic is 6" E46, unlike all the other 16" alloys which are 6.5" E40s. I've been driving on the 225/50s that were on it when I bought the car 6 years ago and have never felt that there was anything wrong with them, despite the 1998 Ford accessories guide (only) saying the Classics ae supposed to have 215/55s..
 
Now, given that I have a little pot of money, probably for the ldt time in my life, but have turned into an old-man-sunday-afternoon driver, Kormoran or Hankook ...
IP Logged
Scorpio_Dan
Junior Member
**



I'm a YaBB newbie!

   
View Profile

Posts: 60
Re: Any tryre experts?
« Reply #2 on: Oct 30th, 2026, 7:17am »
Quote Quote Modify Modify

My Cosworth is using the 225/50 tyres.
Still using it daily!
Dan
IP Logged
DavidBE
Full Member
***



1998 Ghia X 2.9 24V Auto Estate

   
View Profile

Posts: 171
Re: Any tryre experts?
« Reply #3 on: Oct 30th, 2026, 5:09pm »
Quote Quote Modify Modify

Ah, but do you have the 32-spoke Classic wheels? According to the equipmet specification page here, they were only ever on the facelift Ghia and Ghia-X Cosworths (mine being a Ghia-X), but were not on Ultimas (or any non-Cosworth). And it's only the 32-spoke Classics that had 215/55s specified (in the 1998 Ford Accessoroes guide) rather than 225/50s.
 
Anyway, just got back from the local tyre place and my Cossie now has four brand new Hankook 225/50s.
 
Just leaves new rear brake discs to arrange (advisory in last week's MOT, and the tyre place agreed they were pretty bad) and absolutely evrything will then have been done and car ready for hopefully a fair few more years.
IP Logged
Torbayboy
Full Member
***





   
View Profile Email

Posts: 906
Re: Any tryre experts?
« Reply #4 on: Oct 30th, 2026, 9:44pm »
Quote Quote Modify Modify

The estate cossie has 273mm discs at the rear, saloons are270mm
 
R Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll EyesY
 
No scorps now but still a child   Boomers rule
IP Logged

Cosworth Scorpio only 42 on the road now NOW down to 32.incl 25 ultimas
DavidBE
Full Member
***



1998 Ghia X 2.9 24V Auto Estate

   
View Profile

Posts: 171
Re: Any tryre experts?
« Reply #5 on: Oct 31st, 2026, 5:18pm »
Quote Quote Modify Modify

Thanks, I was going to look up the disc size.
 
Huh. Almost had a row at the tyre place. I told them the Ford-specified wheel nut torque, which I wanted, and was told they 'have to use whatever the autodata computer system says, no choice, it's the law' even though I am one of the customers who WILL check the nuts after 100 miles and I do have a calibrated torque wrench. I've had enough trouble over the years trying to undo wheelnuts put on with some pneumatic wrench gun thing far too tight. (I well remember an afternoon in 1982 when it took of us, lying on the ground so we could push togetehr with ouur legs ona one of those spider-typr wheelbraces to get the wheelnuts off a wheel on the 1968 P6 Rover 2000 I had at the time so we could work on the brakes.) Then they started arguing about the tyre pressures, where their 'system' specified 30 front, 27 rear as opposed to the 31/28 in the handbook. They finally grumpily gave in on that, though according to the check I just did, they over-did three of them by half a psi.
IP Logged
Pages: 1  Reply Reply Send Topic Send Topic Print Print

« No topic | Next topic »

Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.