Author |
Topic: Scorpio 95' 2L 16V not OBD-II compliant ? (Read 667 times) |
|
kanor
Newbie
I'm a YaBB newbie!
Posts: 18
|
 |
Scorpio 95' 2L 16V not OBD-II compliant ?
« on: Mar 1st, 2007, 10:24pm » |
 Quote  Modify
|
For approx a year now I have tried to solve a slight missfire on my Scorpio 95'. For this reason I first baught OBD2 kable from www.obd-2.com and also an ElmScan5 but none of them was able to connect to my car. So I then vent to a local Ford dealer and had the car scanned there. They told me that my car was equiped with a EEC-V without ODB-II. It was more like a EEC-V with a EEC-IV inside 
I think this is rather hard to beleive so i wonder if somebody on this forum knows if this is right ?
Sticer on my EEC-V says:
95GB-12A650-BB and also has big letters WILD printed along with EEC-V and a barcode.
|
|
 IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: Scorpio 95' 2L 16V not OBD-II compliant ?
« Reply #1 on: Mar 2nd, 2007, 7:02am » |
Quote Modify
|
THIS page deals with problems like this. Are you sure it is not a 12v? as this is a known and documented issue?.
|
|
IP Logged |
Now I'm an OAP
|
|
|
kanor
Newbie
I'm a YaBB newbie!
Posts: 18
|
|
Re: Scorpio 95' 2L 16V not OBD-II compliant ?
« Reply #2 on: Mar 2nd, 2007, 11:22am » |
Quote Modify
|
Hi, thanks for reply  .
I'm 100% sure it is a 2litre 16valve installed in my car. I have also checked that pins in the DLC are in plase and messaured GND +12v and data-lines are ok.
While googling around internet I found this:
http://www.fordforums.com/showthread.php?t=91662&page=3
It says that som US Fords are equiped with a "B@stard EECV"  . Since mine is a Norwegian model perhaps it also has a "B@stard EECV" ? Is it possible to see this out of the part# 95GB-12A650-BB ?
|
|
IP Logged |
|
|
|
pinto
Full Member
TD04 on a galaxy manifold ? whooooooosh !
Posts: 474
|
|
Re: Scorpio 95' 2L 16V not OBD-II compliant ?
« Reply #3 on: Mar 3rd, 2007, 9:28am » |
Quote Modify
|
Ford do this sometimes - my brother had a Mondeo 2.0 that was sent for diagnostic testing at the local dealers and was discovered to have some weird setup - it took the mechanic 40 minutes to find the diagnostic socket, which wasnt where it should have been, and it wasnt the right socket for the model either...
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Scorpio 95' 2L 16V not OBD-II compliant ?
« Reply #4 on: Mar 3rd, 2007, 12:53pm » |
Quote Modify
|
Kanor are you sure yours is the 95-98 Scorpio? same bodyshape as the one in the picture on top left of this page?
The 85-94 Granada here in the UK was called the Scorpio in Europe.
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy! |
|
|
|
|
kanor
Newbie
I'm a YaBB newbie!
Posts: 18
|
|
Re: Scorpio 95' 2L 16V not OBD-II compliant ?
« Reply #5 on: Mar 3rd, 2007, 9:20pm » |
Quote Modify
|
Hi again.
Yes it's right that in Norway the Scorpio-name was used from 85' when the Granada-name was replaced, but my Scorpio is this new version with the "frog-eyes" that this site is all about. It was sold as new in late 95' here in Norway.
(By the way; Thanks to the guys who has used so mutch energy to build this fantastic site ..)
|
|
IP Logged |
|
|
|
scamp
Newbie
I'm a YaBB newbie!
Posts: 1
|
|
Re: Scorpio 95' 2L 16V not OBD-II compliant ?
« Reply #6 on: Mar 29th, 2007, 8:07pm » |
Quote Modify
|
on Mar 3rd, 2007, 9:28am, pinto wrote:| Ford do this sometimes - my brother had a Mondeo 2.0 that was sent for diagnostic testing at the local dealers and was discovered to have some weird setup - it took the mechanic 40 minutes to find the diagnostic socket, which wasnt where it should have been, and it wasnt the right socket for the model either... |
|
yea that was a problem with some of the earlier mondeos they had no 16 pin connection instead a 3 pin plug up behind the glove box just under the top of the dash.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print