Author |
Topic: CrankShaft pulley (Read 539 times) |
|
rickyfifer
Newbie
love ma cossie 24 (when it runs)
Posts: 15
|
 |
CrankShaft pulley
« on: Nov 15th, 2004, 9:01am » |
 Quote  Modify
|
Have 95 Scorpio 24v which broke a timing chain. Been lucky and only bent 4 exhaust and 2 inlet valves. The problem i have is to get into the chain at the crankshaft i have to remove the pulley wheel. Do i have to use a service tool (21-147 Vibration damper remover) to remove itas all the other cars i have had the pulley wheel has been on a tappered shaft and came off with a wee knock. And suggestions on how to get it off without having to get the tool ..... would be appreciated
|
|
 IP Logged |
|
|
|
howiedintheplace
Senior Member
Based near Evesham
Posts: 1194
|
|
Re: CrankShaft pulley
« Reply #1 on: Nov 15th, 2004, 11:05am » |
Quote Modify
|
Hi
I have most tools for the 24V but you are a bit to far away from me I think?
Maybe a local Ford garage will lend you one. This is what it looks like.
|
|
IP Logged |
Dave
|
|
|
rickyfifer
Newbie
love ma cossie 24 (when it runs)
Posts: 15
|
|
Re: CrankShaft pulley
« Reply #2 on: Nov 15th, 2004, 6:18pm » |
Quote Modify
|
thanks for the reply i called ford dealers close to me today and they suggested using a large bearing puller they said they no longer have the tool thats in the pic which i believe is the vibration damper remover and rekon i would have problems finding one but im sure i'll figure out a way to get it off thanks.
richard
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print