Author |
Topic: Speedo problem (Read 701 times) |
|
kalvin_uk
Newbie
Drives 2.0 16v saloon
Posts: 16
|
 |
Speedo problem
« on: Aug 1st, 2005, 1:13pm » |
 Quote  Modify
|
Hi,
As you might all be able to tell I'm new owner and have a few niggling problems.
My Speedo needle seems to have got stuck against the bottom of the guage pod. If I take the pod out and re-set the needle is this likely to happen again. anything I can do to prevent this?
I also need to drain and re-fill the cooling system due to a split in the radiator - post in parts request currently. Does the system needed to be drained of air whilst refilling ? If so where are the bleed valves ?
Thanks,
Kalv.
|
|
 IP Logged |
2.0 16v Saloon 96 N reg
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Speedo problem
« Reply #1 on: Aug 1st, 2005, 1:24pm » |
Quote Modify
|
hi there and welcome
re speedo, try a reset first.... http://www.fordscorpio.co.uk/instreset.htm
when refilling the system, have it facing up a hill. let it heat up with the cap off. then give it a small run and top up if needed.
hth
|
|
IP Logged |
|
|
|
kalvin_uk
Newbie
Drives 2.0 16v saloon
Posts: 16
|
|
Re: Speedo problem
« Reply #2 on: Aug 1st, 2005, 3:19pm » |
Quote Modify
|
on Aug 1st, 2005, 1:24pm, scorpio_man wrote:hi there and welcome
re speedo, try a reset first.... http://www.fordscorpio.co.uk/instreset.htm
when refilling the system, have it facing up a hill. let it heat up with the cap off. then give it a small run and top up if needed.
hth |
|
Thanks! will jacking the front up do if I can't find a suitable slope ?
|
|
IP Logged |
2.0 16v Saloon 96 N reg
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print