Author |
Topic: Cruise buttons and horn not working (Read 377 times) |
|
adowds
Full Member
Scorpio Rising
 
Posts: 259
|
 |
Cruise buttons and horn not working
« on: Apr 24th, 2006, 11:38am » |
 Quote  Modify
|
Hey up,
Just bought a 24v Ultima, and it's top. Except the cruise and horn don't work. I'm guessing the fact they're all in the one place may mean the problems are linked - any ideas? Possibly just a loose connection inside the steering wheel?
All suggestions gratefully received before I start 'exploring' and inadvertantly explode an airbag module in my face...
Al
|
|
 IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Cruise buttons and horn not working
« Reply #1 on: Apr 24th, 2006, 11:53am » |
Quote Modify
|
Disconnect the battery for a good ten minutes before you try that 
Fuse or bad earth? might be a bad connection in the wheel somewhere
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
adowds
Full Member
Scorpio Rising
Posts: 259
|
|
Re: Cruise buttons and horn not working
« Reply #2 on: Apr 24th, 2006, 2:42pm » |
Quote Modify
|
The fuses seem to be independent - there's only a relay listed for the cruise, horn is fuse 5.
Need to make sure I have the radio code somewhere before I disconnect the battery too... Is there a way of finding it other than Ford Dealer? It's the standard early radio cassette with changer controls fitted (single DIN)
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Cruise buttons and horn not working
« Reply #3 on: Apr 24th, 2006, 4:43pm » |
Quote Modify
|
yep just get the serial number off the side of it and I or someone else can email you the code
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
landbarge
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Cruise buttons and horn not working
« Reply #4 on: Jun 4th, 2006, 11:21pm » |
Quote Modify
|
Had similar problem. Replaced the Clockspring - all problems solved. I have written a small missive on the subject in the 'Advice to others' section. It is a simple and cheap fix.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print