Author |
Topic: still electrics problems (Read 604 times) |
|
irratic
Newbie
I'm a YaBB newbie!
Posts: 49
|
 |
still electrics problems
« on: May 9th, 2006, 8:22pm » |
 Quote  Modify
|
dried out fuse boxes, still no difference at all, think i have a dead short somewhere. everytime i turn ignition off the dash ( ignition, abs, seaqtbelt ,door open oil light ) stay on. ?? if you remove fuse 16 from the main fuse box the lights go out but return the minute you put the fuse back in......anyone got any ideas more's the point can some supply me with a good wiring diagram so i can go threw it?
|
|
 IP Logged |
|
|
|
irratic
Newbie
I'm a YaBB newbie!
Posts: 49
|
|
Re: still electrics problems
« Reply #2 on: May 10th, 2006, 12:07am » |
Quote Modify
|
cheers simmo i'll have a go at that
|
|
IP Logged |
|
|
|
irratic
Newbie
I'm a YaBB newbie!
Posts: 49
|
|
Re: still electrics problems
« Reply #3 on: May 10th, 2006, 8:01pm » |
Quote Modify
|
sorted elecrics, if anyone in the same boat..... beleive it or not it was a bad connection on the wiper motor??strange but true...
|
|
IP Logged |
|
|
|
sector-9
Senior Member
No scorpio anymore
Posts: 1069
|
|
Re: still electrics problems
« Reply #4 on: May 10th, 2006, 8:14pm » |
Quote Modify
|
Who'd have thought, eh? Thanks for letting us know though, might save somebody else a lot of grief in future.
Just out of interest, how did you find the problem? Did you notice it visually whilst checking something else in the same area, by reading the wiring diagrams, or just plain old process of elimination (i.e. pulling out other fuses/relays randomly!)??
Darren
|
|
IP Logged |
|
|
|
irratic
Newbie
I'm a YaBB newbie!
Posts: 49
|
|
Re: still electrics problems
« Reply #5 on: May 10th, 2006, 8:32pm » |
Quote Modify
|
well mate, i was doing the process of ellimination. disconecting multi plugs etc.started near fusebox...i no that when i pulled fuse16 the lights went off and i could hear a relay click. pulled the wires off the interior fan, nothing. as i was putting them back on i heard the relay click and the lights were off,then they just came back on so start bending the wires from there back towards the fusebox. gently pulling each loom.and eventually discovered it was the wiper....
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print