Author |
Topic: Partno needed (update) (Read 411 times) |
|
jerryvr
Newbie
I'm a YaBB newbie!
Posts: 32
|
 |
Partno needed (update)
« on: Oct 23rd, 2006, 7:46pm » |
 Quote  Modify
|
Hi Guys, can you provide me with the partnumber for the hose that runs from the thermostat housing to the heater pipe on the block? (2.0 16V) and the partno for the expansiontank tap.
Thanks in advance
|
|
 IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6284
|
|
Re: Partno needed
« Reply #1 on: Oct 24th, 2006, 9:42am » |
Quote Modify
|
Identify the part on the appropriate picture and post back when you have identified the part and I or others will try to help with part no .
look here for pictures of the cooling systems COOLING SYSTEMS
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
jerryvr
Newbie
I'm a YaBB newbie!
Posts: 32
|
|
Re: Partno needed
« Reply #2 on: Oct 24th, 2006, 10:29am » |
Quote Modify
|
Already went there, Problem is that the hose does not show up on any manual on the site. Also looked in eCat today and it isn't listed there. To be more precise, there are 2 hoses leaving the thermostat housing. 1, the biggest one goes to the expansion tank. it is the other, smaller one i need, which goes round the corner and connect to a metal tube which is attached to the block.
|
|
IP Logged |
|
|
|
Kjetil S
Senior Member
2001 BMW 520iat
Posts: 1419
|
|
Re: Partno needed
« Reply #3 on: Oct 24th, 2006, 2:25pm » |
Quote Modify
|
Sounds like exactly the same pipe that burst on mine a short while ago. My FMD had about half an hour of head scratching without finding the part anywhere in the system, but finally managed to locate one. I can confirm that it isn't in any manual.
My tip is to take the pipe to your FMD and give them a challenge 
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
jerryvr
Newbie
I'm a YaBB newbie!
Posts: 32
|
|
Re: Partno needed
« Reply #4 on: Oct 26th, 2006, 5:58pm » |
Quote Modify
|
shameless bump
|
|
IP Logged |
|
|
|
jerryvr
Newbie
I'm a YaBB newbie!
Posts: 32
|
|
Re: Partno needed (update)
« Reply #5 on: Oct 28th, 2006, 12:17pm » |
Quote Modify
|
Well, managed to get hold of a replacement hose. aftter fitting and bleeding the cooling system the engine died on the way home. Turns out the blown gasket has somehow blocked up the internal tubing on the engine.
To make a long story short, engine overheated, gasket went, oil went, engine died and with it, sadly, the scorp.
I have driven many cars in my life, this was by far the best. It really hurts to see that she is beyond economical repair now.
|
|
IP Logged |
|
|
|
Dave
Senior Member
Tourmallard 24v (ex-owner)
Posts: 1984
|
|
Re: Partno needed (update)
« Reply #6 on: Oct 28th, 2006, 7:22pm » |
Quote Modify
|
 Thats a very poor do, not tempted to repair/replace engine?
|
|
IP Logged |
Life after the Scorpio ain't easy..
|
|
|
jerryvr
Newbie
I'm a YaBB newbie!
Posts: 32
|
|
Re: Partno needed (update)
« Reply #7 on: Oct 29th, 2006, 9:54am » |
Quote Modify
|
No, unfortunately, am in the process of starting up a business and i need a reliable car.
I can't affort to be without a car so going to have to get anohter.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print