Author |
Topic: 2.9 12v ultima 95 timing (Read 304 times) |
|
hiacekim
Newbie
I'm a YaBB newbie!
  
 
Posts: 20
|
 |
2.9 12v ultima 95 timing
« on: Nov 1st, 2006, 7:42am » |
 Quote  Modify
|
Hi all,
last year, top wiring loom burnt out . So local auto electrician said would new harness it for £300 ..great!...left him too it , now done but......he cant get it to start , because he says , no matter how he tries, the timing seems to be out. (The distributor had been taken out previously , and swapped with a new one .by ford ,this was when the wiring not the distributor was found to be at fault , so they put the old one back in) . If I could print some instructions for him, on how to set the Scorpios valve /distributor timing that would be fantastic.
Cheers Kim 
|
|
 IP Logged |
2.9 cosworth est 1996
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6284
|
|
Re: 2.9 12v ultima 95 timing
« Reply #1 on: Nov 1st, 2006, 8:00am » |
Quote Modify
|
Read this previous post HERE there are some links in there that will help also some advice...
otherwise search the main site from HERE
The whole of the workshop Manual is on there as supplied to us by FORD.
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
howiedintheplace
Senior Member
Based near Evesham
Posts: 1194
|
|
Re: 2.9 12v ultima 95 timing
« Reply #2 on: Nov 1st, 2006, 8:31am » |
Quote Modify
|
I am amazed your guy don't know how to adjust the distrubter.
It's a really old basic system.
As Snoopy says.
The later engines have a mark to follow, the pre 1995 ones do not you have to use a strobe light.
|
|
IP Logged |
Dave
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print