Author |
Topic: replacing ABS pump and module (Read 285 times) |
|
Chieftain
Full Member
Mechanically Challenged with a 24V Cosworth
 
Posts: 491
|
 |
replacing ABS pump and module
« on: Mar 21st, 2007, 5:28pm » |
 Quote  Modify
|
Furhter to my earlier posts on ABS problems today it was time to change the ABS pump, follwed the excellnt insructions found else were on the site(although they dont mention disconnecting the pipes from module) decide to replace the whole lot, easy as anything and it took 3 hours including bleeding brakes (a must) and lots of tea. End result set off and watched as speedo crept passed 10-15-20-30-40 SORTED Yahoo, cost £83 pounds for module, pump and sensor. Rather than the Ford price of £1200 for pump only excluding fitting.
Also found you can change rear sensor without having to remove brake carrier it comes out as easy as anything, so all in all happy chappy, advice is if those light annoy dont give up, it can be fixed 
|
|
 IP Logged |
Bob
if it ain't broke fix it and it will be
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: replacing ABS pump and module
« Reply #1 on: Mar 22nd, 2007, 7:44am » |
Quote Modify
|
Well done that man, it certainly is a good rewarding feeling when things go right, it also shows up the possibility that had you allowed the garage to do the job they are in the position to replace anything that's not really required. This is my fear all the time with these cars, so out come the spanners.... 
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print