Author |
Topic: 24v manual gearbox bellhousing problemo (Read 265 times) |
|
mazzy_j
Full Member
Posts: 664
|
 |
24v manual gearbox bellhousing problemo
« on: Apr 8th, 2007, 5:46pm » |
 Quote  Modify
|
hi all, now iv got a couple of free minutes iv started to make some progress with swapping the diesel (mt75) bellhousing to the sierra one ready to be put in my cossie 
Got the old one off ok, the problem is i cant get the new bellhousing to mate up to the gearbox its self. All the bolt holes and the 2 locating pins line up, it just wont push back the last inch.
Is there a technique in getting it to go back together or a special tool i need to get my hands on?
thanks, Matt
|
|
 IP Logged |
|
|
|
solarpanel
Full Member
I love YaBB 1G - SP1!
Posts: 551
|
|
Re: 24v manual gearbox bellhousing problemo
« Reply #1 on: Apr 8th, 2007, 7:01pm » |
Quote Modify
|
look at the spigot bearing in the flywheel
|
|
IP Logged |
|
|
|
mazzy_j
Full Member
Posts: 664
|
|
Re: 24v manual gearbox bellhousing problemo
« Reply #2 on: Apr 8th, 2007, 7:11pm » |
Quote Modify
|
hi the gearbox is out of the car, the problem is getting the new bellhousing to go flush against the other half of the gearbox (which contains the cogs).
Matt
|
|
IP Logged |
|
|
|
solarpanel
Full Member
I love YaBB 1G - SP1!
Posts: 551
|
|
Re: 24v manual gearbox bellhousing problemo
« Reply #3 on: Apr 8th, 2007, 8:59pm » |
Quote Modify
|
are the locating holes clear
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print