Author |
Topic: Blown head gasket (Read 507 times) |
|
catalina
Junior Member
I'm a YaBB newbie!
Posts: 87
|
 |
Blown head gasket
« on: Jun 16th, 2007, 11:52pm » |
 Quote  Modify
|
Just blown a head gasket on a cossie. Ford's quote for repair is more than the car is worth----so---- What to do?
Is it possible to do as a DIY job? I've done head gaskets on "ordinary" cars. Are there any particular difficulties with this Cosworth engine?.
Alternatively does anyone know of someone in the Worcestershire, Hereford, Shropshire area who could tackle this job?
Any ideas would be much appreciated. There's a lot of pressure on me to scrap the car but that will hurt a lot.
John 
|
|
 IP Logged |
Still learning, slowly.
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: Blown head gasket
« Reply #1 on: Jun 17th, 2007, 1:19am » |
Quote Modify
|
Sorry to hear of your misfortune, if it will help I blew my engine up on the M5, it ended up recovered by RAC to
Stratford Bridge Garage
A38 Ripple
Nr Tewksbury
Gloustershire
GL20 6HF
Tel 01684 591 212
They did a good job, They fitted a 2nd hand engine which I supplied, they supplied and fitted a complete clutch kit, Spark Plugs, a New Drive Belt, Oil & Filter, Antifreeze and a new Motorcraft Battery.
The labour cost was £480, they did a good job everything worked as it should and I have had no problems with it since.
It might be a place worth considering, they will even recover it for you, it's worth a phonecall.
Hope this helps
Pete
ps it's a great feeling when you've been without the car for a while and then when you get it back all is well again..... 
|
|
IP Logged |
Bring back fair wages.........
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Blown head gasket
« Reply #2 on: Jun 17th, 2007, 1:54am » |
Quote Modify
|
Hi John, if you've done head gaskets before it should be fairly straightforward for you, theres no major problemsi with it.
In fact if you source another good engine as Pete says that might prove less expensive. It all depends how much you can do yourself.
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print