Author |
Topic: Hi all, another newby.............. (Read 909 times) |
|
teaboyterry
Junior Member
I'm a YaBB newbie!
Posts: 58
|
 |
Hi all, another newby..............
« on: Feb 10th, 2008, 6:59pm » |
 Quote  Modify
|
Great site, wasn't expecting to need help so soon, but.....Problem is fuel & temp guage needles go to half way on start up and stay there until engine is turned off. I have read previous problems and think the solder on the circuit board behind dash may be the problem.
My question is regarding the removal of the wooden dash board trim...Do i have to take out the climate control facia and all the other fixtures to get at the screws holding the trim in place? ( i am worried about damaging anything)
My car is 1996 2.0lt 16v Estate (high spec)
Any help would be gratefully recieved.
Terry
|
|
 IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Hi all, another newby..............
« Reply #2 on: Feb 11th, 2008, 3:27pm » |
Quote Modify
|
Hi Terry and welcome to the site 
If you damage anything I'm sure we can find you some spares 
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
teaboyterry
Junior Member
I'm a YaBB newbie!
Posts: 58
|
|
Re: Hi all, another newby..............
« Reply #3 on: Feb 13th, 2008, 4:34pm » |
Quote Modify
|
Problem now sorted. ...... It was circuit board !!!
Thanks for all your help
Terry
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
