Author |
Topic: The ABS warning light remains on (Read 521 times) |
|
runsun
Newbie

 I love YaBB 1G - SP1!

Posts: 26
|
 |
The ABS warning light remains on
« on: Mar 24th, 2010, 12:33pm » |
Quote Modify
|
Ford Scorpio -96 DOCH 2.016V After replaceabled the front brake blocks at left/right side, the ABS warning light start to light - and it remains on when engine is running ! Is it possible to measure the signal from the wheel-sensors with a mulitmeter ? Any ideas Reg. Rune, Norway
|
|
IP Logged |
|
|
|
Snoopy
Administrator
    
 Very old.BAD tempered and missing friends.

Posts: 6284
|
 |
Re: The ABS warning light remains on
« Reply #1 on: Mar 24th, 2010, 5:17pm » |
Quote Modify
|
If it stays on after you have had a run in the car then it is most likely that you have disturbed the connections under the front wing where the ABS cable is clipped . There is a plug there which can be detached and cleaned and then recovered in water pfroof grease. The ABS Brake fault finder is HERE
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
|