Author |
Topic: clunking front end (Read 747 times) |
|
JG2
Full Member
Posts: 677
|
 |
clunking front end
« on: Apr 7th, 2010, 6:19pm » |
 Quote  Modify
|
having a real problem isolating what this is....clunks in front ...low down both sides in suspension area for first 4-5 miles then clears...had link rods changed ...wishbone rear bushes changed ....anti roll bar is solid
doesn't clunk if you push down wings when cold ...really annoying ..if anyone has experienced or got any ideas would be grateful...garage cant isolate
|
|
 IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: clunking front end
« Reply #1 on: Apr 8th, 2010, 1:28am » |
Quote Modify
|
It wouldn't happen to be when you brake would it ? 
|
|
IP Logged |
|
|
|
JG2
Full Member
Posts: 677
|
|
Re: clunking front end
« Reply #2 on: Apr 8th, 2010, 8:14am » |
Quote Modify
|
no braking doesnt influence it at all....just a steady clunking for 5 miles then gets better then goes after another 2-3 miles
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: clunking front end
« Reply #3 on: Apr 8th, 2010, 8:49am » |
Quote Modify
|
You could try disconnecting the track rods,then move them slightly within the rack,I have had a happening in the past whereby the inner ball joints creak but it transfers as a distinct knock.If that is your problem,slide the gaiter back and work a little grease into the joint whilst rotating the rod.
GOZZ.
|
|
IP Logged |
|
|
|
JG2
Full Member
Posts: 677
|
|
Re: clunking front end
« Reply #4 on: Apr 8th, 2010, 9:09am » |
Quote Modify
|
ok sounds a tad drastic...wont that mess the tracking up etc
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: clunking front end
« Reply #5 on: Apr 8th, 2010, 11:22am » |
Quote Modify
|
No,just remove the track rod end from the track control arm,you won't be altering any distances unless you take the end off the rod,and waggling the inner ball joint can't move anything trackwise,
GOZZ.
|
|
IP Logged |
|
|
|
JG2
Full Member
Posts: 677
|
|
Re: clunking front end
« Reply #6 on: Apr 8th, 2010, 12:01pm » |
Quote Modify
|
ok tks for that ....
what is weird is that it totally clears after 6 miles or so...before then it sounds like link rods are worn that sort of noise
|
|
IP Logged |
|
|
|
big_timer
Full Member
2.3 manual ultima saloon
Posts: 183
|
|
Re: clunking front end
« Reply #7 on: Apr 8th, 2010, 4:51pm » |
Quote Modify
|
try the anti-roll bar bushes.remove the top half of the bracket.to have a good look.
|
|
IP Logged |
how can i soar with the eagles?
|
|
|
JG2
Full Member
Posts: 677
|
|
Re: clunking front end
« Reply #8 on: Apr 8th, 2010, 5:23pm » |
Quote Modify
|
ok will do ..tks for that advice
|
|
IP Logged |
|
|
|
leewar
Senior Member
I'm a YaBB newbie!
Posts: 1509
|
|
Re: clunking front end
« Reply #9 on: Apr 21st, 2010, 8:46pm » |
Quote Modify
|
Pedro, did you find out what the problem was and has it been cured ?? Lee
|
|
IP Logged |
|
|
|
JG2
Full Member
Posts: 677
|
|
Re: clunking front end
« Reply #10 on: Apr 22nd, 2010, 9:47am » |
Quote Modify
|
No i didnt and its driving me nuts !!.....clunks front right mostly for 5 miles then clears
wonder if its suspension shocks....?? any ideas ?
john
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print