Author |
Topic: Drivers lower arm repairs (Read 301 times) |
|
Tenfut
Full Member
White Cosworth Saloon
Posts: 642
|
 |
Re: Drivers lower arm repairs
« Reply #1 on: Apr 29th, 2025, 9:44am » |
 Quote  Modify
|
Excellent have you fitted them yet?
|
|
 IP Logged |
Everything in moderation!!
|
|
|
Ryan_Williams
Newbie
I'm a YaBB newbie!
Posts: 24
|
|
Re: Drivers lower arm repairs
« Reply #2 on: Apr 29th, 2025, 10:13pm » |
Quote Modify
|
That's excellent. They do seem to be pretty much impossible to get hold of now.
What make/model is the balljoint from, and what are the measurements to fit one?
|
|
IP Logged |
|
|
|
Scorpio_Dan
Junior Member
I'm a YaBB newbie!
Posts: 59
|
|
Re: Drivers lower arm repairs
« Reply #3 on: Apr 30th, 2025, 9:02pm » |
Quote Modify
|
So far so good. It has been on since Sunday. I replaced the bolts to longer ones HT10.9 with nylon nuts.
Endless searching spec sheets etc, I settled on a TC1505 from Delphi. The angle of the joint is about spot on. I used a grinder to scoop out the hole where the old ball joint sat. This supported the new joint very nicely. I also fitted a polybush the front location , leaving the void bush for bump absorbing.
I will get the measurements for drilling. Testing continues!
|
|
IP Logged |
|
|
|
cobrascim
Full Member
I'm a YaBB newbie!
Posts: 113
|
|
Re: Drivers lower arm repairs
« Reply #4 on: May 31st, 2025, 8:01am » |
Quote Modify
|
Sounds brilliant Dan well done mate.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print