Click to return to main site

Welcome, Guest. Please Login or Register.
May 10th, 2026, 5:49am


Balance: £3.30
Home Home Help Help Search Search Members Members Login Login
Ford Scorpio Forum« replacement Inlet Manifold 2.3 ultima 1997 »
   Ford Scorpio Forum
   General
   Problems
(Moderators: scorpio_man, Simmo, Highlander, admin, Baz)
   replacement Inlet Manifold 2.3 ultima 1997
« Previous topic | Next topic »
Pages: 1  Reply Reply Send Topic Send Topic Print Print
   Author  Topic: replacement Inlet Manifold 2.3 ultima 1997  (Read 417 times)
slimspider
Newbie
*





   
View Profile Email

Posts: 32
replacement Inlet Manifold 2.3 ultima 1997
« on: Nov 7th, 2006, 11:06am »
Quote Quote Modify Modify

Just after some advice as heard from the mechanic who is fixing my 2.3 ultima that a new inlet manifold form Ford is £242.04 and also need gaskets each end apparently so wonder if there is alternative source other than Ford (prob a stupid question) or has anyone got one for sale.
IP Logged
Jonnycab
Senior Member
****




Former owner of 2.3 Ultima Facelift saloon

   
View Profile

Posts: 3900
Re: replacement Inlet Manifold 2.3 ultima 1997
« Reply #1 on: Nov 7th, 2006, 11:16am »
Quote Quote Modify Modify

They are pretty few & far between, but you do get them coming up second hand from time to time.
I think there is one on Ebay at the moment for a buy it now price of £100 (bit expensive).
 
The only problem with buying a second hand one is, that as they are getting old & worn now, then it may not last very long & you may be throwing good money away.
But then again...you may get lucky Smiley
IP Logged
Highlander
Moderator
Expert
*****




13 Scorpios, XR4x4, Suzuki SJ413 for off road :)

   
View Profile Email

Posts: 8244
Re: replacement Inlet Manifold 2.3 ultima 1997
« Reply #2 on: Nov 7th, 2006, 12:04pm »
Quote Quote Modify Modify

Yep just as Jonny says, If you can find one cheap second hand then go for it, best place is probably on here.
 
ebay has a couple just now for around £110-120 posted (i put the links in your parts wanted thread)  
 
I thought Ford were dearer than that for them, try fordpartsuk, they will be cheaper than Ford dealer I would expect
IP Logged



on Oct 17th, 2011, 12:35pm, Simmo wrote:
I give up ! Roll Eyes Too much for an old boy!  Huh

slimspider
Newbie
*





   
View Profile Email

Posts: 32
Re: replacement Inlet Manifold 2.3 ultima 1997
« Reply #3 on: Nov 7th, 2006, 12:11pm »
Quote Quote Modify Modify

Thanks for this.. appreciated
IP Logged
slimspider
Newbie
*





   
View Profile Email

Posts: 32
The END!! Inlet Manifold 2.3 ultima 1997 - advice
« Reply #4 on: Nov 13th, 2006, 11:17am »
Quote Quote Modify Modify

The mechanic says it is not worth continuing as when fitted the new inlet manifold he cannot keep the water level up or something like that.  He did ask me if the car had overheated and I did not notice anything until steam pouring out of the bonnet but was doing about 80 - 90 a the time..so not really looking at dials.  But I had the car for 8 years and spent a lot on it recently with replacement gear box and new rear bumper so as the inlet manifold had cracked I gave go ahead to buy a new inlet manifold from Ford and try to mend it but he says not worth continuing any more as water leaking may be the head gasket damaged....  so now my advice needed is where is best place to sell this car now - ebay?  It is drivable he says but only for a short distance if I runit from cold and keep the heater on - so I can get it home and my wife will have her own way and get a smaller car....
But I will be back as I love these scorpios....  where else can you get full leather seats and comfort etc like these cars..  If Highlander reads this... I will return your ariel parts (many thanks) I had just got the radio and CD changer working great again.... plus I have an unuesed rubber belt - like a fan belt - in the garage that may be of use... to you so send me your postal address.   Cry
IP Logged
TiberiuS
Senior Member
****




Ex. 1996 2.3 Ultima - RIP P789 KHJ

   
View Profile WWW Email

Posts: 2257
Re: replacement Inlet Manifold 2.3 ultima 1997
« Reply #5 on: Nov 13th, 2006, 5:49pm »
Quote Quote Modify Modify

Bad luck mate, I live in constant fear of mine falling victim to the same fate Cry
 
You say the garage says it's not worth fixing, how much is it going to cost you to get it sorted? If you know the car then surely it's worth more to you than the £1000-£1500 you'd get stung for another one. What's the year, condition and mileage like? A mint Scorpio isn't worth a fortune these days and a non runner/minor MOT faliure is worth next to nothing. You've hit the two major weakpoints on the 2.3, the gearbox and the head/manifold, surely it would be worth considering getting it fixed?  
 
If you do want another Scorpio then keep yours as a donor for the 'less than perfect' bits of the new one, 2 Scorps are better than 1 as they say Cheesy.
 
I'd try and hang onto it, better the evil you know and all that Wink  
 
Good luck. Regards, Bruce.
IP Logged

Bruce - '07 Jaguar XKR coupe, '95 Jaguar XJ Sport 4.0, '82 Ford Capri 2.0 Ghia, '15 Honda Civic (sloooooww..)
Pages: 1  Reply Reply Send Topic Send Topic Print Print

« Previous topic | Next topic »

Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.