Author |
Topic: Rear Bumper Removal (Saloon) (Read 1149 times) |
|
dexix
Guest
|
Hi Guys, I need to remove my bumper, do some work on it and get it back on asap as the wife is always needing the car so could anyone tell me where all the screw/bolts are located (eg. do I have to take the inner wheel linings off etc) any help so I can do this quickly would be appreciated.
|
|
 IP Logged |
|
|
|
Spannerdemon
Guest
|
 |
Re: Rear Bumper Removal (Saloon)
« Reply #1 on: Apr 14th, 2007, 6:19am » |
 Quote  Modify
 Remove
|
Full instructions: HERE
The torx bolts can be a cow to remove if they have (probably) rusted. 
|
|
IP Logged |
|
|
|
TiberiuS
Senior Member
Ex. 1996 2.3 Ultima - RIP P789 KHJ
 
Posts: 2257
|
|
Re: Rear Bumper Removal (Saloon)
« Reply #2 on: Apr 14th, 2007, 11:43pm » |
Quote Modify
|
I managed to break two (2) torx bits doing this  
Just the 4 bolts underneath and the fixing on either side as I remember
|
|
IP Logged |
Bruce - '07 Jaguar XKR coupe, '95 Jaguar XJ Sport 4.0, '82 Ford Capri 2.0 Ghia, '15 Honda Civic (sloooooww..)
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: Rear Bumper Removal (Saloon)
« Reply #3 on: Apr 15th, 2007, 12:03am » |
Quote Modify
|
Go and buy yourself some hexagonal bolts to replace the torx ones, it will be easier next time.... 
Pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
dexix
Guest
|
|
Re: Rear Bumper Removal (Saloon)
« Reply #4 on: Apr 15th, 2007, 8:11pm » |
Quote Modify
Remove
|
Thanks guys - looking forward to this job at the weekend now
|
|
IP Logged |
|
|
|
davidberryman
Newbie
I'm a YaBB newbie!
Posts: 32
|
|
Re: Rear Bumper Removal (Saloon)
« Reply #5 on: Apr 16th, 2007, 9:55am » |
Quote Modify
|
just done this friend, need to get two m8 x 22mm bolts ready!
used grinder to cut old off.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print