Author |
Topic: MOT (Read 708 times) |
|
joe-satch
Senior Member
joe satriani is the best guitarist in the world.
Posts: 1161
|
hi to all members,well our daughter is going to be very happy..her 2.3 ultima estate has passed its MOT this morning,the tester did draw my attention to a rear wheel bearing that may need to be replaced before the next MOT..just a little play in the bearing but not enough to fail the car...a job for dad in the new year.  .regards den. .
|
|
 IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
 |
Re: MOT
« Reply #1 on: Oct 14th, 2008, 11:47am » |
 Quote  Modify
|
on Oct 14th, 2008, 11:01am, joe-satch wrote:| ,the tester did draw my attention to a rear wheel bearing that may need to be replaced before the next MOT..just a little play in the bearing but not enough to fail the car...a job for dad in the new year. .regards den. . |
|
hi there
don't leave it!!!
any movement will end up taking out the hub as well.
you don't get much warning when it goes.
hth
|
|
IP Logged |
|
|
|
joe-satch
Senior Member
joe satriani is the best guitarist in the world.
Posts: 1161
|
|
Re: MOT
« Reply #2 on: Oct 14th, 2008, 12:49pm » |
Quote Modify
|
thank you for your advice scorpio-man,i will look into it asap.is there a section on the site that covers the replacement of the rear bearing ....thanks again..regards den. ....ps..regarding the rear n/s hub nut....is it a clockwise or an anti clockwise thread?..thanks chaps. .
|
|
IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: MOT
« Reply #4 on: Oct 14th, 2008, 1:11pm » |
Quote Modify
|
Snoopy has done a step by step write up  HERE. As Andrew says DO NOT LEAVE IT. You will need a 'brake wind back tool' in order to wind back the rear caliper piston as it is a screw thread ( for the handbrake) so you cannot push it back. You also will need a large torque wrench to get the nut tightened to 200ft/lbs which is way beyond the range of most DIY torque wrenches. 
|
|
IP Logged |
Now I'm an OAP
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: MOT
« Reply #5 on: Oct 14th, 2008, 1:12pm » |
Quote Modify
|
How's that for timing!!. 
|
|
IP Logged |
Now I'm an OAP
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: MOT
« Reply #6 on: Oct 14th, 2008, 1:14pm » |
Quote Modify
|
mike, when you're good, you're good!
|
|
IP Logged |
|
|
|
joe-satch
Senior Member
joe satriani is the best guitarist in the world.
Posts: 1161
|
|
Re: MOT
« Reply #7 on: Oct 14th, 2008, 1:15pm » |
Quote Modify
|
thank you chaps...i found the write-up and have read it...made very interesting reading...i will no doubt tackle the job very soon.. .regards den.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print